This card adds LoRa capabilities to your CL-32. This will allow you to sent long range radio messages to other devices.
The card will also let you use systems like MeshTastic with your CL-32, turning it into a mesh communication device
Specs
The main module on the card is the Wio-SX1262 from Seeed Studio which is connected using the following pins
- power switch – pin 8
- rf_sw1 – pin 15
- miso – pin 16
- mosi – pin 17
- sck – pin 18
- rst – pin 21
- nss – pin 38
- dio1 – pin 39
- busy – pin 40
The antenna pin of the module is connected to Antenna 1 on the back PCB of the case by default. This can be changed by cutting a trace and adding solder blobs to connect Antenna 2, or leave it unconnected if you are going to use the external antenna connector on the module